Easton Triumph


Art.nr: 11211-102
707,-
Vennligst velg

Kontakt oss

buesport@buesport.no

Telefon

47752515

Mange nyheter

Se gjennom vårt utvalg

Ordinær pris 925kr for 6 stk.

 

OBS! Bestiller du montering av piler, må du også legge ved spisser, nock og fjær.
Når du oppgir pillengde, skal det være fra gropa på nocken, ned til enden av skaftet. Spissen skal ikke være med.
Er du usikker på hvor lange piler du skal ha, så ta kontakt med oss.

Det er ingen returrett på piler som er montert og kappet, med mindre feilen ligger hos oss.

 

Triumph is engineered for superior accuracy and performance in even the toughest target materials, and every size Triumph is designed at the maximum allowable diameter for World Archery competition.  With a choice of four sizes, three nock systems, and five point weights, there’s a Triumph for every competitive bow style and required state of tune.

Triumph’s internal armor system provides a natural advantage in terms of front-of-center balance, providing even more stability and accuracy, without compromising dynamic spine. 

Note:  Triumph shafts are precision-cut and squared at the front for optimal point alignment and fit, and should only be cut from the rear before nock system installation and assembly.   Cutting the shaft at the point end will reduce the effectiveness of the internal armor system and potentially decrease durability in hard targets.  This will void warranty.

Cutting Instructions:  Use only a high-speed, thin-blade pro shop saw for cutting Triumph shafts.  NOTE:  Cut shafts ONLY from the rear, designated by the printed gold band.  DO NOT cut the end with the aluminum armor core.

Point installation:  Triumph shafts are compatible with the use of Easton low-temperature hot melt cement for point installation. Easton recommends use of a gel-type cyanoacrylate for UNI bushing installation, and a small drop of hot melt for installation of PIN Nock adapters. 

 

  • Armored Carbon Technology
  • Straightness: ± .002
  • Weight tolerance: ± 1 grain
  • All sizes at World Archery maximum allowed 9.3mm outside diameter
  • Black, smooth matte finish
  • Multi-layer wrapped carbon fibers
  • S or G UNI Bushing included - Ønskes pin nock, må pins bestilles separat.
  • Pin nock adapter sold separately
  • Points fit all shaft sizes, sold separately, available weights: 100, 125, 150, 175 and 200 grains
  • Nominal GPI: 350/9.25, 400/8.8, 450/8.5, 500/8.2
Spine @ 28" spanStock lengthS UNI BushingG UNI BushingPin Adapter 
  Size Inches Inches Grains Grains Grains  
  350 0.350 31.75 11 15 13  
  400 0.400 31.25 11 15 13  
  450 0.450 30.75 12 16 13  
  500 0.500 30.25 12 16 13

 

Vet du ikke hvilken dimmensjon du skal ha? Ta kontakt med oss, eller bruk shaftselector nederst på hjemmesiden til produsendten.